ART C + microprocessor controller is a universal controller for the H.T.W. pump. The ease of use and reliability make it the most widely used controller in simple H.T.W. control systems.
IRYD 610 is a controller designed to control the operation of a central heating boiler with a feeding screw. The controller controls an extensive heating installation. A specially designed menu enables gradual activation of further functions and possibilities of the regulator. This regulator has a special fuzzy logic pid operation algorithm, which, after the user specifies the maximum and minimum boiler power, can smoothly select the appropriate fuel doses depending on the load on the installation and the type of fuel. The regulator controls the blower operation continuously by selecting the appropriate amount of fuel for the given blower speed. In addition, this version is equipped with an additional pid algorithm influencing the flue gas temperature, regulating the boiler power so that the flue gas temperature does not exceed the maximum value set by the user. These modern control algorithms allow you to save on the amount of fuel burned, and thus have a beneficial effect on the natural environment. Additionally, up to 5 mixing valve control modules, an internet module and a room panel can be connected to the regulator, which allows for a significant expansion of the heating system.
Controller Titanic 3 SW1 i SW2
Titanic 3 is a regulator designed to control the operation of a central heating boiler with a screw or piston feeder (with a feeder position sensor). This regulator has the option of weather control. After connecting an additional external temperature sensor, the regulator calculates the boiler setting according to the heating curve set by the user. In addition, the Titanic regulator supports remote control - REMOTE CONTROL or room thermostat, to increase the comfort of using the controller, it is possible to stabilize the temperature in the room by using these additional devices. SW1 and SW2 controllers are designed to work with high power boilers. The SW1 version is designed for boilers with a three-phase feeder with a power of up to 4kW and a blower up to 0.55kW, while the SW2 version supports single-phase devices, including a feeder and blower up to 0.55kW.
The sensor is designed to work with boilers with both screw and piston feeders. It is used to check the position of the tray to detect jams or damage. The use of a feeder position sensor in a boiler with a piston (drawer) feeder enables precise administration of a single dose of fuel. It also helps prevent embers from flowing back into the basket or overheating the gearmotor. In the case of the screw feeder, the sensor mainly serves as an additional protection for the feeder motor in the event of its jamming. It consists of a reed switch and a magnet.
Argon 3P is a universal controller for boilers with a feeding screw, and the successor of a reliable Argon P controller. An improved control algorithm makes the combustion process more optimal. Argon 3P microprocessor controller is designed to control the operation of a feeding screw, a blower, a C.H. pump, and a H.T.W. pump. It has an output for connecting a remote control which further enhances its usability. Different types of housings in which the controller is available allow its mounting on the boiler or a tank with fuel, on the wall in the boiler room, under the boiler construction, in the control cabinet, on a bus.
ART PW microprocessor controller is a universal controller for C.H. or H.T.W. pumps. It has an input for connecting a remote control which makes the controller even more functional. The ease of use and powerful algorithm allow to use this controller for virtually most systems in which the pump is used.
The LAN module is intended for remote control of the central heating boiler operation regulator. by ProND with an RJ12 connector for connecting the PILOT room panel (1-Wire communication) or with an RJ12 connector for RS485, RS232 communication. The regulator works with a wide range of ProND products. The possibilities and application depend on the controller to which this module is connected.'
Sterownik IRYD RTZ PID 601 SW1 i SW2
IRYD RTZ Pid Fuzzy Logic KOLOR is a regulator designed to control the operation of a central heating boiler with a screw or piston feeder (with a feeder position sensor). The regulator controls an extensive heating installation. A specially designed menu enables gradual activation of subsequent functions and capabilities of the regulator. This regulator has a special pid fuzzy logic work algorithm, which, after defining the maximum and minimum boiler power by the user, can smoothly select the appropriate doses of fuel depending on the load of the installation and the type of fuel. The regulator continuously controls the operation of the blower by selecting the appropriate amount of fuel for a given blower speed. In addition, this version is equipped with an additional pid algorithm that influences the flue gas temperature and regulates the boiler power so that the flue gas temperature value does not exceed the maximum value set by the user. These modern control algorithms allow you to save on the amount of fuel burned, and thus it has a beneficial effect on the natural environment. RS 232 ProND communication was used in Iryd RTZ PID RS, which allowed to extend the possibilities of its operation. RS232 ProND allows, among other things, to connect the controller to the LAN module. This communication, compared to 1 - Wire, allowed to increase the scope of functions used for remote control of the regulator. SW1 and SW2 controllers are designed to work with high power boilers. The SW1 version is designed for boilers with a three-phase feeder with a power of up to 4kW and a blower up to 0.55kW, while the SW2 version supports single-phase devices, including a feeder and blower up to 0.55kW.
It is a sensor based on a photodetector whose task is to detect the intensity of the flame. Based on this, the sensor detects a flame and the controller proceeds to the appropriate procedure (e.g. lighting up). Most often used for boilers with automatic firing. Make sure that the sensor is not covered or dirty as this may prevent proper operation of the boiler.
YETI controller is a universal controller for fine coal and hopper boilers. YETI microprocessor controller is designed to control the blower and circulating pumps in the C.H. systems. It has an output for connecting a remote control.
ART PCW microprocessor controller is a universal controller for C.H. and H.T.W. pumps. It has an input to connect a remote control that makes the controller more functional. The ease of use and powerful algorithm allow to use this controller for virtually most systems in which the pump is used.
The MZM-50 mixing valve module cooperates ONLY with ProND controllers equipped with the RS485 ProND STANDARD for connecting additional expansion modules, e.g. Iryd 610. The module is designed to control the actuator with a mixing valve pump in central heating installations. In addition, a room thermostat or a PILOT can be connected to the regulator, which further increases its functionality. The device communicates with the controller via the RJ 12 socket marked as "RS 485 interface". You only need to connect them with a suitable cable.
The PROTON BUFOR temperature controller is designed to control the operation of central heating boilers. V CLASS equipped with a blower or exhaust fan. It stabilizes its temperature by means of smooth regulation of fan speed, blows the boiler (in order to remove excess gases generated in the combustion process) and protects the central heating system against boiling water. The advantage of this regulator is that in addition to operating the central heating pump, it is also possible to control an additional pump, which can be used as a pump for loading the DHW tank or Buffer, which makes it easier to adapt the device to the user's needs.
Algorytm pid – The PID algorithm Description: PROTON PID controller is a modernized version of the PROTON controller, with an added PID algorithm, making it one of the most reliable and the most fuel-efficient controllers on the market. A PROTON PID microprocessor controller is designed to control the operation of the blower and the circulation pump in the C.H. systems; it has output for connecting a remote control which further enhances its usability. This controller continuously and simultaneously automatically controls the blower to maintains a boiler temperature at a constant level. This solution ensures that there are no rapid temperature changes in the boiler. The use of this controller improves the operation ergonomics: there is no need to interfere in settings the controller in the case of a change of
TRIO is a controller designed to control the operation of the C.H. boiler, for pellet or eco-pea coal, equipped with the feeding screw. A special controlling algorithm allows to burn pellets in a more optimal way than traditional controllers. TRIO controller has the ability to control the boiler temperature depending on the weather. In addition, a remote control panel PILOT or a room thermostat can be connected, which allows for remote control of the boiler and of the stabilization of room temperature.
Titanic is a controller designed to control the operation of a central heating boiler with a screw feeder or piston feeder (with a feeder position sensor). This regulator has the option of weather control. After connecting an additional external temperature sensor, the controller calculates the boiler setting according to the heating curve set by the user. In addition, the Titanic controller supports remote control - PILOT or a room thermostat, to increase the comfort of using the controller, it is possible to stabilize the temperature in the room by using these additional devices.
IRYD 620 is a regulator designed to control the operation of a central heating boiler with a pellet burner. The regulator controls an extensive heating installation. A specially designed menu enables gradual activation of subsequent functions and capabilities of the controller. This regulator has a special pid fuzzy logic algorithm that can smoothly select the appropriate fuel doses depending on the installation load and the type of fuel. The regulator continuously controls the operation of the blower by selecting the appropriate amount of fuel for a given blower speed. All this, combined with the automatic firing up and shutdown of the boiler, allows you to save on the amount of fuel burned, and thus it has a beneficial effect on the natural environment. The regulator can support additional expansion modules operating in the RS 485 standard, which allow for a significant extension of the heating installation and convenience of use. Such devices include a room panel, an internet module and a mixing valve module (possibility of connecting 6 mixers at the same time). Thanks to the support of the optical flame sensor and the flue gas temperature sensor, this regulator can work with virtually any pellet burner, both with 1 fuel feeder and with 2 feeders (auxiliary feeder). It supports self-cleaning burners with a moving grate as well as simple burners without optics and automatic cleaning. In addition, it has a function that allows combustion on an additional grate as well as the operation of the burner without flame control in emergency mode. The whole system is equipped with a number of additional sensors (e.g. external temperature, room panels) that allows the boiler to be turned off if the given heating circuits are heated up.Thus, the boiler with the iridium 620 regulator will ignite itself and start heating the circuit that will require it at the moment. As one of the few regulators, Iryd 620 has the ability to work with a heat buffer, which is more and more often used in modern central heating installations. The whole thing is dressed in a legible color display and proven electronic solutions that allow for pleasant use of the regulator for many years.
The H.T.W. pump Description: The H.T.W. PROTON is a modern regulator for fine coal and hopper boilers with a support for and hot water H.T.W. pump. PROTON H.T.W. microprocessor controller is designed to control the operation of the blower, the circulating pump and the H.T.W. pump in C.H. systems. It has an output for connecting a remote control.
IRYD RTZ is a controller designed to control the operation of the C.H. boiler with a feeding screw or a ram feeder (with a feeder position sensor). The controller controls an extensive heating system. A specially designed menu allows to progressively activate further features or abilities of the controller. IRYD controller has an output to control the mixing valve actuator. It has the ability to control two independent heating circuits. Each of the circuits can be connected to additional remote control panel (PILOT) or to a room thermostat.